Category Archives for "Blog"
Today I am going to show you how to remove an oil stain from concrete. This is a common problem, especially if you own an older car or, like us, because of having many short term tenant rentals (ours are managed by the folks at www.extendedstay-tucson.com and we love them!), you’re never sure what kind of car might be parking in your driveway or garage and you always end up with stains after a while. So I compared four different methods. Some worked, some didn’t. So you are going to want to stay tuned because you are going to save time and money in the process. Let’s get started. I tried four different methods. I used kitty litter, TSP, WD-40, and Drylok Etch.
So I wanted to see which one would work best at removing the stain – the oil stain or whatever stain it is – in the concrete. I used to kitty litter first. And this is a real basic method. All you do is pour the kitty litter onto the stain and then mash it real good with your body weight. Now, you don’t have to wear green shoes like I did, but mash it really good and then you sweep it off the stain and I did not see any change.
That’s not to say that this method wouldn’t work for you, so give it a shot. The second one was using WD-40. All I did here was spray the WD-40 onto a little circular section of the stain, because after all, this is an experiment, and I did not want to try it on the whole section, I sprayed it on, and then I scrubbed it really good with a stiff wire brush. I did this for several minutes and after that, I brushed on some kitty litter to absorb the WD-40 and hopefully the stain. And I let that sit there for a good 10-15 minutes.
In the meantime, I took some straight TSP and I poured that over the adjacent stain like so. And again, I used a stiff wire brush to hopefully scrub out the stain. And this is what it looked like, I put some kitty litter to absorb the stain. So I brushed off the WD-40 and again, nothing. So WD-40 is a bust. Then here is a surprise. I shoveled off the kitty litter that absorbed the TSP, and there there was a noticeable difference. So TSP is a good method to try on an oil stain.
The forth method that I used was Drylok Etch. Be safe when you use all these chemicals, wear gloves, safety glasses. And what I did is I scrubbed it with a stiff wire brush and this is what it looked like. So it turned out really awesome with the Drylok Etch. And as a reminder, this is what it looked like before. So Drylok Etch, awesome. There you have it. The kitty litter and the WD-40 didn’t work out as well for me as maybe, it might for you.
You could give it a shot, especially if you own a cat, which I don’t. I went out and bought the kitty litter. That’s a whole different story. And most everybody’s got WD-40. But the TSP and the Drylok Etch were total winners. And I would say try the TSP first, then go for the Drylok Etch. But there you have it. Those are two solutions that will help you out with removing your oil stain from concrete.
I hope this helped you out. Here’s some more info from YouTube…
Among the most effective home improvements when selling your house you can do is to replace the old and worn-out carpets. This is going to make the property look nice and give a great impression on prospective buyers. Buyers fast get turned off if they think that they’re going to must replace the stained and tattered carpets in every room.
Spackle and then paint holes to get rid of them. Go to your local home improvement store like Lowe’s or Home Depot to purchase the spackle. Use a quite small number in the event that you will need to fill miniatureThe little holes might be filled with spackle using only a bobby pin. Use pretty much anything with a straight, hard edge or an old credit card to smooth the dehydrated spackle. Then you have to paint. The holes will evaporate.
Clean up the outside of your house. All it takes to make your home look and feel better is a little TLC on the outside. Trim the shrubs and pull the weedsof the flower bed. Add some cosmetic landscape lighting and be sure that all the outside light fixtures are in proper working order.
The outside of your home also makes a superb spot for a home improvement job. Staining your drive adds a lovely touch to the very front of your dwelling. Additionally, look to see whether you have to fill any cracks or re-tar the driveway. Occasionally, the front of your home could be forgotten as you make improvements, but these projects can really add a lot to the aesthetic value of your property.
Decals are an excellent facelift for appliances and boring furniture; getting them off is a different narrative. The subsequent tip is positive to aid in the event you’re out of ideas on the best way to remove old stickers from surfaces. Spray on the decals you wish to remove with WD 40 spray. Attempt to lift the edges to get the liquid. Let it sit in the solution for a minute or two and after that gently scrape the sticker with an old credit card or a plastic knife.
Consider the effect on the resale value of your home’s before you embark on a home improvement job. For example, converting your garage into a living room may make sense for your immediate needs, but this type of addition turns off a lot of home buyers. Conditions can change even should you not plan on selling immediately, and you may have to spend additional cash getting your home back to the way it was.
Consider converting fresh rooms in your house. Seriously look at what you need to work with, before you spend too much money adding an additional room or two to your home. Are you getting much use out of that exercise office or room? Storage spaces like attics can be transformed into something useful, like a bedroom.
Enhance your house by removing items you don’t want. You will have more space as well as your home will appear to be larger. De-mess by donating unneeded things for example clothes, furniture, etc., keeping or throwing away Even packing your stuff away in boxes and putting those in the attic will remove things from your immediate living place.
Plenty of houses have wall to wall carpeting that is stained and looks bad. offer lasting appeal and more durability than carpeting can provide. With these tricks, you can work smarter-not harder. Shortly your house is going to be a stunning showplace. You’ll notice live in a home that’s more wonderful than you ever could have imagined.
Do your own homework in case you can not manage a professional designer. Review on-line resources, publications and magazines . You never know where you will find an image that can determine the future of your renovations. Literature may also provide you with the info that you need to get your project done.
Making home improvements and easy home repairs is a terrific thought for making your house and raising the value of your home a more pleasant location, but additionally, it may be a catastrophe if done wrong. Needing to mend your home improvements with additional developments can be avoided with a little thought and effort. Use the below hints to practice the right mindset to make sure all your home improvements are successful.
Keep family and your house safe by properly installing a smoke detector in your home. Smoke detectors find unsafe and hazardous smoke before you do. Stay in the safe side and buy a new smoke detector. Be sure to check the batteries each month to make sure that it’s functioning accurately when disaster strikes.
Give a fast update to your kitchen by wiping down the cupboards and adding or altering the . Handles or giving your kitchen cabinets a brand new set of knobs really can improve the look of your kitchen without costing a lot of money. With all these styles of knobs and handles accessible, you can alter the nature of your kitchen easily and quickly.
In the event you want your living room or dorm to have a contemporary clean feel to it, choose to purchase a couch with long, lean lines and nominal cushioning. Select the couch in a bold color like red, black, or beige to make an impression in your region. You can dress it up with striped ornamental pillows or some zebra print.
One custom which is good for keeping your home improvement project, is setting aside a particular budget for upgrades and repairs. Homeowners who allocate a certain sum of money for such endeavors will probably be better at maintaining their dwellings. In the event you don’t use all your budget, carry it around to the following year.
Today we’re going to discuss how to measure your existing windows in your home, so that if you want to replace them or get a quote on new windows, you could take those numbers to a supplier and quote them up.
Generally you’ve got two thicknesses of walls to start with. You usually have either a 2×4 framed wall or a 2×6 framed wall. So, if you have a 2×6 framed wall like we have in this home, you’ve got your 2×6 framing, which is actually five and a half inches wide, you are going to have in this age of home, you are going to have half inch plywood on the outside and you are going to have half inch drywall on the inside, for a total of six and a half inches in depth, so that actually be your wall thickness. That’s an important part that your windows supplier is going to want to know. So you are going to need that measurement.
Depending on the age of your home, this can vary a little bit because if you have a home that’s built before the 50s or even some of the 60s have three quarter inch shiplap on the outside, instead of half inch plywood. So you need to determine a little bit exactly how your home is constructed before you can make that decision. A little bit of investigation work, look at the year of your home, some of the products you used, there could be, if it’s an older home, lath and plaster on the inside, instead of half inch drywall. That could vary anywhere from half an inch to an inch, just depending how or who put it on. There is some variables you need to consider for the width.
Once you determine that, another way of doing would be, if you opened up your window, I got a window here, we’re going to pop the screen out. So, if you can determine a distance from the outside of your window frame to where your sheeting or your plywood should start and put a little mark here, then you should be able to measure from that mark into here where the back side of your trim is and that will also give you that same measurement. A little trick to do, but if you are a little bit uncertain, it might be the best way to go, just to double confirm what you think is going on there.
That pretty much is all you need to do from the inside. I am going to show you how to do it, measure everything from the outside. In this case, we are trying to fit in to an existing exterior finish, which here is a next ninety type wood-siding. The homeowner isn’t wanting to disturb that siding anymore than necessary, so we want to fit into that hole that we cut when we removed the window and that being said, that’s going to mean, we’ll probably have a little more space in here, where the insulation is behind the trim than there is right now, but we’d rather have that than have it not fit in the hole or have to cut excess siding or if you had stuck a wall, you don’t want to cut anymore than you have to of that.
Again, what we’re doing is we’re going to go outside, show you where to measure from and I’ll explain a little bit the reasoning for that, once we are out there it might be easier to show you. Okay. One of the things to also have with you is a piece of paper to write down everything that you’re recording for measurements. It’s handy to have a little bit of information, maybe pre-written on their, what room you are measuring, how many of that particular size you need, and a spot where you can put the width and the height as well.
Something that can be helpful is drawing a little picture viewed from the outside, so that you know, who you are talking to, you know which side is going to open or how is going to open and it will help them visualize exactly what you are wanting. What we’ve got here is aluminum clad window from early nineties to middle nineties and this style window is installed with a nailing flange. That nailing flange is also aluminum and is actually behind the siding or stucco, whichever you’ve got on your home. So you can actually see it or get out of it to pull the nails or screws out.
What you would have to do to remove this window is set your saw blade depth on your circular saw and run it around the exterior of the window, so that you are cutting through the cocking, the siding or the stucco or whatever is there and through that aluminum flange.
You don’t want to cut too far in and cut the plywood wide open, but you got to kind of figure that out and run the saw around there, staying close to the window so you are not cutting the opening too large. Once you’ve done that, it’s a matter of removing the inside trim, blinds, all that stuff and the window should slide out relatively easy.
OK, we’re going to chop this process into a couple of articles, so stay tuned for Part 2 coming soon. But don’t rush us! ;0)